Specifications:
Product name : Auto-stamp Motorized Meso Machine
Model name : Ultima A6
Needle material: Titanium Alloy
Target Area:Face
Input:AC 100-240V 50/60Hz
Adapter:5V,1000mA
Pen Size:approx.12.6*2cm(L*D)
Packing Size:approx.17*12.5*5.5cm(L*W*H)
Weight:about 390g
Concerns:Acne, Age Spots/Freckles, Blemishes, Early Signs of Aging, Wrinkles/Lines
(1cm=10mm=0.39inch)
Packing Included:
1x Host
1x Manual
1x US Adaptor
2x Cartridges 12pin Needles
2x Rechargeable Battery
Functions:
* Scar removal including acne scar removal or treatment.
* Acne Scar Removal, Acne Scar Treatment.
* Anti Wrinkle Treatment, Anti Aging.
* Hair Loss Treatment or Hair Restoration.
* Surgical Scar Removal.
* Hyper pigmentation treatment.
* treatment of acne scars and healing wounds.
How To Operate:
1.Setting Adapter Mode
(1) Plug in DC adaptor to the jack.
(2) Plug in DC adaptor to AC outlet.
2. How to install a cartridges
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2of machine, push needles cartridge horizontally up to the end.
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needles length should be done after turn on the machine
(5) If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally, fitting round slots (slot 1,slot2)together.
3. Adjustment of speed and needle length
(1) Adjustment of Speed and ON/OFF
(2) 5 speed level control
Pressing the switch 2 seconds to open the device, It starts from the lowest speed to highest speed when you turn on the power firstly.The speed cycles low to high .Please press the switch 2 seconds when you need to stop the device.The flicker frequency of light faster, the speed is higher.
(3) Adjustment of needles length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise.Turning it clockwise, length of it will be longer.Turning it counter clockwise, length of it will be shorter.